Servo Garage Doors garage door team

Garage Door Opener Repair & Installation in Mesquite - Fixed Today, Priced Before We Start

Most garage door faults are fixed in a single visit. The common springs, cables and rollers are brought to the job, and you get the price before any work starts.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Call Now - 24/7 Dispatch

We answer around the clock

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*on approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Styles & brands we work with

Raised-panel steel
Raised-panel steel
Carriage house
Carriage house
Modern flush
Modern flush
Full-view glass
Full-view glass
LiftMaster openers
LiftMaster openers
Chamberlain openers
Chamberlain openers

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Genie Cable & Drum Replacement: The Olympia Owner’s Guide

Genie cable and drum replacement in Olympia typically runs $130-$250 installed, and we stock the common Genie-compatible assemblies on hand for same-day service. The cable drum is the grooved wheel that rides on the torsion tube and winds/unwinds the lift cable as the door moves; when it cracks or the cable frays, the door goes crooked or slams shut. We see this most often in Olympia’s older homes near the Capitol Campus and in the Tumwater Hill area, where original Genie hardware from the 2000s is reaching its end.

Call (360) 995-1547

Which Genie Models This Applies To

Genie has used several cable drum designs across its opener lines, and matching the wrong one leaves your door unbalanced or noisy. The critical detail is the drum’s inner diameter and cable groove pitch, which must match your door’s height and weight.

Most Genie screw-drive and chain-drive openers installed in Olympia between 1998 and 2018 use a standard 4-inch diameter cast-aluminum drum with a 1/8-inch cable groove. The IntelliG 1000 and 1200 series, the ReliaG 650, and the older ProMax models all share this footprint. The newer ChainLift 600 and SilentMax 750 switched to a lighter composite drum with a slightly different hub depth, about 1/4 inch shorter, which means the set-screw lands in a different spot on the torsion tube. We measure before we quote, because we’ve seen the wrong drum ordered from a parts diagram that didn’t show the revision.

Genie OEM drums carry part numbers like 36764A.S or 36764R.S, but we also stock quality aftermarket equivalents from DDM Garage Doors and Prime-Line that match the spec at a lower parts cost. The aftermarket units we use are die-cast zinc rather than aluminum, which holds up better in Olympia’s wet winters where road salt tracks into the garage and corrodes lighter metals. We list both options on the written scope, per Clause 1 of The Haven Standard, and you choose before we start.

To identify your drum, look for the white Genie label on the opener rail; the model prefix tells us the drum family. If the label’s gone, we measure the drum bore, count the cable grooves, and check whether your door is standard 7-foot or the 8-foot height common in newer Olympia construction near Kaiser Road.

Signs Your Genie Cable & Drum Replacement Is Failing

Technician performing professional garage door spring repair and maintenance
Signs Your Genie Cable & Drum Replacement Is Failing
  • The door hangs crooked when closed. One cable has slipped or frayed on its drum, so that side of the door sits lower. In Olympia’s hillside neighborhoods like Eastside and Bigelow, we see this after heavy rain swells the door panels and puts extra load on one side.
  • A loud bang from the garage, then the door won’t lift evenly. The cable has snapped or pulled free from its drum slot. The remaining cable takes the full weight, which overloads the opener and can strip the trolley carriage.
  • Visible rust or corrosion on the drum grooves. Olympia’s marine climate means garage humidity stays high eight months a year. Once the drum surface pits, the cable doesn’t seat cleanly and wears itself apart in months, not years.
  • The cable looks frayed or has broken strands near the bottom bracket. This is often a drum problem, not a cable problem. A cracked drum wobbles on the tube, creating a sawing motion where the cable enters the groove. Replacing the cable alone without fixing the drum buys you six months.
  • The opener strains or the motor hums without lifting. The drum isn’t winding cable properly, so the door’s effective weight exceeds what the opener is rated for. On Genie screw-drive units, this extra load strips the carriage internally, turning a $200 drum job into a $400-plus repair.
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

Service Price Range (Olympia)
Genie cable & drum replacement (standard 7-ft door) $130-$190
Genie cable & drum replacement (8-ft or custom height) $170-$250
Additional cable replacement (both sides) +$40-$80
Opener carriage inspection (recommended if overloaded) No charge during same visit

The range depends on three things: drum material (OEM aluminum vs. aftermarket zinc), whether both cables need replacement, and whether the torsion tube itself is scored where the old drum set-screw bit in. We photograph the scored tube, show you the image, and quote the repair before touching a tool. That’s Clause 4 of The Haven Standard, the rule this company was built on in 2015.

Every Genie cable & drum replacement includes new cables, the drum assembly, lubrication of all moving hardware, and a balance check with the door disconnected from the opener. The Done Right Promise covers the work. If the door drifts or the cable slips in that first year, we make it right.

DIY or Call Us?

Technician checking garage door track alignment with a level
DIY or Call Us?

There’s a safe middle ground here, and then there’s the line you shouldn’t cross.

You can safely check whether the cable is off the drum by pulling the red emergency release handle and lifting the door manually, with the door fully closed. Look for fraying, rust, or the cable sitting outside its groove. If you see any of those, stop. The torsion tube above the door is under hundreds of pounds of torque, and the set-screws that hold the drums are tightened to specific foot-pounds. A slipped wrench or a drum that spins free can cause serious injury. We don’t write step-by-step torsion instructions for homeowners; the risk isn’t worth the savings.

What we do is come out, photograph what we find, and quote a flat price before any work starts. The local pro carry the right winding bars, torque wrenches, and Genie-compatible drums on hand. On a wet Tuesday last February, we replaced a drum on a Genie ReliaG in the Rainier area at 7 a.m. because the homeowner’s car was trapped inside before a commute. That’s the job. Call (360) 995-1547 and we’ll name the part, quote the number, then do the work.

Get the price in writing before anything starts.Serving Mesquite - a real person answers, day or night.
Call now

FAQs

Ready to get started? Free estimates · same-day response in Mesquite
Call (970) 536-1724

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local garage door pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically the same day.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Mesquite Customers Say

★★★★★ 5.0 from 3+ reviews

"Opener had been stalling for months. The tech showed me the logic board reading, replaced the board instead of the whole unit, and it cost a third of the other quote I had."

- Robert K.

"They sent a photo of the snapped torsion spring before quoting anything. Price on the estimate was the price on the invoice. I have never had that happen with a home repair."

- Dana W.

"Text came through with the technician name and photo twenty minutes before he arrived. Small thing, but I stopped worrying about who was at the door."

- Priscilla M.

How It Works in Mesquite

Getting your garage door handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your garage door needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Mesquite - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Current Offers

Bring these savings to your next appointment.

10%

10% Off Your First Service Visit

Valid on your first completed service visit with us.

Expires Mar 31, 2027
Always

Written Price Before Any Work Starts

Expires Mar 31, 2027
Free

Free Second Opinion on Any Written Estimate

Expires Mar 31, 2027
Included

Documented Photo Record on Every Visit

Expires Mar 31, 2027

Request a Free Estimate

Tell us what's going on in Mesquite. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch