Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Fast, Reliable Garage Door Parts Across Franklin
If you’re searching for a specific garage door part in Franklin, you probably already know the part number or at least the symptom. What you need is someone who stocks it, brings it, and quotes a written price before touching anything. That’s how Servo Garage Doors works in Franklin. We carry torsion springs, cables, drums, rollers, hinges, bottom seals, and weatherstripping for the brands most common in Middle Tennessee, and our techs know the HOA requirements in Westhaven, Ladd Park, Fieldstone Farms, and Berry Farms well enough to match parts on the first trip. Call (970) 536-1724 and you’ll reach a live person who can tell you what’s on the truck and what it costs.
Why Servo Garage Doors Is Franklin’s Preferred Garage Door Parts Company
Franklin homeowners tend to research before they call. They read the three-star reviews, they want the price range on the page, and they notice when a company shows documentation instead of asking for trust. Servo was built on that instinct. Since 2015, every job we’ve done has included a flat, written price and a written scope before any work starts. That’s Clause 1 of The Haven Standard, and it’s not a marketing line. It’s the rule our techs work under.
Clause 4 is why the tech photographs the failed part before quoting a replacement. When we roll into Westhaven or Fieldstone Farms, you’ll see a photo of your snapped torsion spring, your cracked bottom seal, or your stripped cable drum on the technician’s tablet before any dollars are discussed. That photo record is yours to keep after the job. No other garage door parts company serving Franklin structures the visit that way, and it’s the reason our Franklin customers keep our number in their phones.
Marcus Deller leads our team, and he’s the one who made the documentary photo record a non-negotiable in 2015. Every Franklin visit closes with written documentation: what was found, what was replaced, what it cost, and what the warranty covers. No handshakes required.
Our Garage Door Parts Services in Franklin

Most Franklin service calls fall into a few categories. Here’s what we actually see and what we actually do.
Torsion Spring Replacement
Franklin’s 2000s-era planned communities put a generation of garage doors on the same clock. The original torsion springs installed in Westhaven, Ladd Park, and Fieldstone Farms between 2005 and 2010 were rated for roughly 10,000 cycles, and a 3-car household that opens doors eight times a day hits that rating in about seven years. In Franklin, that means entire streets are now experiencing simultaneous spring failures. A torsion spring replacement in Franklin runs $180-$340, and we install high-cycle-rated springs that last substantially longer than the originals.
Safety note: torsion springs are under extreme tension and cause serious injury when mishandled. We never recommend a DIY spring replacement. A trained tech with the right winding bars and the right torque settings should do this work.
Extension Spring Replacement
Older single-car garages near Franklin’s historic downtown square and the smaller homes off Columbia Avenue and Main Street often still run extension-spring systems. These springs stretch along the horizontal track instead of winding on a bar above the door. When one breaks, the door jerks sideways and binds. Extension spring replacement in Franklin runs $180-$340 as well, and we always replace both springs, even when only one has snapped, because the second is usually within weeks of failing.
Cables and Drums Repair
Cables are paired with drums at each end of the torsion bar, and the two have to move in sync. When a cable frays at the bottom bracket or jumps off the drum, you’ll see the door lift unevenly or hang at an angle. In Franklin, the timber-framed openings on older historic homes settle unevenly over time, which puts the door slightly out of square and accelerates cable and drum wear at the bearing plates. Cable and drum repair in Franklin runs $130-$250. We carry multiple drum profiles on the truck so we’re not ordering a part after the first visit.
Rollers and Hinges Replacement
Rollers wear first on the bottom panels, where they absorb the most track friction and road dirt. Nylon rollers run quieter than steel, and in Franklin’s newer subdivisions with bedrooms above garages, that matters. Hinges bind when the door begins to sag, and a bound hinge puts extra load on the opener. Roller and hinge replacement in Franklin runs $110-$220 per door, including the hardware. If we’re already on site for a spring or cable, we’ll show you the roller and hinge condition in the photo record and give you a written line-item price before adding anything to the scope.
Before
AfterTrusted Brands We Service in Franklin
We’re brand-agnostic, which matters in Franklin. The architectural review boards in Westhaven and Berry Farms have pre-approved specific door profiles and paint-matched colors, and those doors are usually Clopay or Wayne Dalton carriage-house models. We stock replacement sections, springs, seals, and hardware compatible with those profiles, plus Genie and Amarr components for the broader Franklin market. When a homeowner orders a standard steel door online and calls us to install it, the first thing we ask is whether their HOA has signed off, because in Westhaven that rejection letter arrives fast. We’d rather help you source a door that passes review the first time.
Common Garage Door Parts Problems We See in Franklin Homes

Our techs work Franklin neighborhoods every week, and the patterns are consistent. These are the four we see most.
- Synchronized torsion spring failures in 3-car garage communities. The original doors in Westhaven, Ladd Park, Fieldstone Farms, and Berry Farms were installed during the same 2005-2010 construction wave, which means thousands of original springs are hitting their cycle rating in the same window. When one spring breaks, the other is usually within months of the same failure.
- Bottom seal cracking from freeze-thaw swings. Middle Tennessee’s winter ice storms close roads often enough to be a nuisance but not often enough to prompt preventive maintenance. The uninsulated steel doors common on Franklin’s 3-car garages contract and expand through those swings, and the rubber bottom seal cracks along the pavement contact line. Then humid summers do the rest.
- Binding doors on historic downtown properties. Single-car garages near the Franklin square often sit on timber-framed openings that have settled unevenly over decades. That settlement pushes the drums and cables out of alignment and wears end bearing plates out of square. The door binds halfway up and fights the opener.
- Corroded roller hinges and bottom brackets. Franklin’s humid summer air accelerates rust on uninsulated garage hardware. Roller hinges and bottom brackets on doors that face north or sit on shaded lots corrode faster, which makes the door noisier and puts more stress on the opener carriage.
Pricing for Garage Door Parts in Franklin, TN
Here are the price ranges we quote for parts work in Franklin. Every one of these is a flat, written price delivered before work begins, no exceptions. The price you see is the price you pay. No “call for a quote.” No estimate that doubles after the tech looks at the door.
| Part or Service | Franklin Price Range |
|---|---|
| Torsion Spring Replacement | $180-$340 |
| Bottom Seal Replacement | $100-$220 |
| Weatherstripping Installation | $100-$240 |
| Cable and Drum Repair | $130-$250 |
| Roller and Hinge Replacement | $110-$220 |
What affects the final number within those ranges? Spring wire diameter and cycle rating, door weight, whether we’re replacing one spring or both, and seal profile. But here’s the important part: we tell you the exact number before any part comes off the truck. You approve the written scope, and then work starts. Every Franklin job ends with a documented photo record and a written warranty. Call (970) 536-1724 for a free estimate and we’ll put the price in writing before you commit to anything.
We Also Serve Cities Near Franklin

Servo Garage Doors runs parts and repair calls throughout Williamson County and into the surrounding metro. If you’re in Brentwood, Spring Hill, Nashville, or La Vergne, we bring the same flat written pricing and documented photo record to your door. You can learn more about our full coverage and the neighborhoods we work by visiting our Garage Door Parts in Franklin page for local details.
Serving Franklin, TN - Our Local Coverage Area
We’re based in the Franklin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Parts in Franklin

Yes. We keep records of the pre-approved door profiles and paint-matched colors for Westhaven, Ladd Park, Fieldstone Farms, and Berry Farms, and we source Clopay and Wayne Dalton parts to match those specifications. When we replace a section, a bottom seal, or a panel in a Westhaven door, we verify the profile and color against the architectural review board’s file before ordering. If you have the HOA approval letter, bring it to the appointment and we’ll match it exactly. Call (970) 536-1724 and we’ll check what’s on file for your street.
Because the homes were built in the same short window. Westhaven, Ladd Park, Fieldstone Farms, and Berry Farms went up during the 2005-2010 construction boom, and the original garage doors were installed with torsion springs rated for roughly 10,000 cycles. A family opening three doors several times a day reaches that rating in seven to ten years. That means thousands of Franklin homes are now crossing the threshold simultaneously. When yours fails, the fix is a spring replacement in the $180-$340 range, and we’ll install a higher-cycle-rated spring if you want longer life before the next replacement.
Usually it’s both, and the root cause is often the opening itself. The timber-framed garage openings on older homes near the Franklin square settle unevenly over decades, which pushes the door out of square and causes the cables to ride unevenly on the drums. The cable frays at the bottom bracket while the drum wears at the bearing plate. We’ll measure the track alignment, photograph the wear points, and give you a written scope for cable and drum repair in the $130-$250 range before anyone touches the door. Call (970) 536-1724 and we’ll get a tech to your block in Franklin today.
Every three to five years, depending on exposure. Franklin’s winter ice storms cause the door metal to contract, and the rubber bottom seal cracks along the pavement contact line where it flexes most. Then the humid summers soften and misshape the seal further. If you see daylight under the door, feel a draft, or find water pooling inside the garage after a storm, the seal is done. Bottom seal replacement runs $100-$220 in Franklin, and we carry the specific seal profiles used on Clopay, Wayne Dalton, Genie, and Amarr doors so we’re not special-ordering from the shop. Call (970) 536-1724 for a written price.
Yes. Ladd Park homes from 2020 typically have LiftMaster or Chamberlain openers with photo-eye sensors mounted low on the track and a belt-drive rail. Common issues we see at the three-to-five year mark include sensors misaligned by a bumped track or a tripped wire, and rail belts that stretch and slip. Opener parts repair in Franklin runs $120-$320, and we’ll show you the diagnostic photo record before quoting. Call (970) 536-1724 and we’ll schedule a Ladd Park call.
One Local Insight: The HOA Compatibility Problem
Franklin’s 2000s-era planned communities, Westhaven and Ladd Park especially, put a generation of garage doors and openers on the same 15-to-20-year replacement clock. The original doors were installed in a short construction window, which means thousands of homes are now hitting parts failures simultaneously. But the bigger wrinkle is this: those communities have strict HOA architectural boards that restrict door styles, profiles, and paint colors. You can’t just order a generic steel door online and have it installed. The HOA will reject it. A parts swap, even for something as simple as a bottom seal, sometimes has to match a pre-approved profile and a paint-matched color that the board has on file. A company that doesn’t know Westhaven’s guidelines or Ladd Park’s approved list will order the wrong part and leave you holding a rejection letter. We keep those records, and that’s the difference between a parts supplier and a Franklin garage door parts specialist.
Our techs were called to a Westhaven home where the Clopay carriage-house door had a snapped torsion spring and the bottom seal was crumbling from Middle Tennessee’s freeze-thaw cycles. We replaced the spring with a high-cycle rating and sourced a replacement bottom seal in the exact paint-matched color that the Westhaven architectural review board had on file, then rebalanced the door to within a half-inch of track alignment tolerance. The homeowner got photos of the failed spring before the quote, a written line-item price, and the seal in the right color before the HOA could flag anything.
Written by Marcus Deller, Owner at Servo Garage Doors, serving Franklin since 2015.






Before
After
Before
After