Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Parts Across West Hollywood
Garage door parts in West Hollywood, FL typically run from $110 for a roller replacement up to $340 for a full torsion spring repair, with most jobs completed the same day a technician arrives. If your door is groaning, sagging, or refusing to move, the part that failed has a name, a price range, and a fix. We’re Servo Garage Doors, and our Garage Door Parts team serves the full West Hollywood corridor off Pembroke Road and Taft Street, with techs rolling out in branded vans stocked for the most common failures on 1960s-to-1980s CBS homes.
Call (970) 536-1724 and a live person answers. You’ll get a written price before any work starts, and a documented photo record when the technician leaves. That’s the way we’ve done it since 2015, and it’s written into The Haven Standard.
Why Servo Garage Doors Is West Hollywood’s Preferred Garage Door Parts Company
West Hollywood is a specific kind of housing market. The homes are mostly concrete block, built between the late 1950s and 1985, many with single-car garages and original 8-foot openings. These doors were installed long before Broward County adopted its current wind-pressure requirements. We know what that means when a spring snaps on a 1974 original assembly: the replacement needs to be right, and the paperwork needs to exist. Marcus Deller, who leads Servo, built our parts service around exactly that combination of mechanical work and documentation.
Our techs arrive in uniform and background-checked, with the license number printed on the page where you can see it, not buried in a contract. Every appointment ends with a photo record of what was found and what was replaced. Clause 4 of The Haven Standard says we photograph the failed component before quoting a replacement. That’s not a marketing line. It’s the rule.
West Hollywood homeowners tend to research before they call. They read the three-star reviews. They want the price on the page. We publish our ranges below, and we hold to them. No urgency theatre, no “two slots left this week.” Just a written price and a technician who can show you the broken part and explain, in plain English, what it does.
Our Garage Door Parts Services in West Hollywood
Torsion Spring Replacement
Torsion springs are the heavy coils mounted above the door that counterbalance its weight. In West Hollywood’s humid, salt-laden air, these springs rarely reach the 10-to-15-year lifespan you’d see further north. We typically see them fail at 5 to 7 years. A full torsion spring replacement in West Hollywood runs $180-$340 depending on wire diameter and cycle rating. We replace springs in matched pairs because a spring that fails once has a twin with the same fatigue.
Extension Spring Replacement
Older West Hollywood homes, especially those built in the 1970s, often still run extension springs along the horizontal track. These stretch and contract with every cycle, and corrosion from the coastal air eats the coils over time. A snapped extension spring on a two-car or single-car door is a common call for us in the areas around South State Road 7. Replacement runs $180-$340, same as torsion, because the labor is equivalent even though the parts cost less. Safety note: extension springs under tension can release with force if mishandled. We don’t recommend touching them yourself.
Cables and Drums
Lift cables are the steel wires that pull the door up the track. In salt-exposed West Hollywood, cables and their end bearing plates are frequently the first component to go. We see cables with rust-through breakage on doors that still open, which is dangerous because the door can drop unevenly. Cable repair in West Hollywood runs $130-$250, and we always inspect the drums, brackets, and spring condition during the same visit. A cable that failed from corrosion almost always took a drum or a bearing plate with it.
Rollers and Hinges
Rollers wear down to the metal, then the door starts grinding. Hinges crack at the weld points. On single-car garages throughout West Hollywood, these parts are original to the 1970s era door, which means the nylon has long disintegrated and the steel is squealing. Roller replacement runs $110-$220 for a full set, and hinges are replaced individually based on inspection. We stock steel and nylon rollers for standard 8-foot and 7-foot openings.
Weatherstripping and Bottom Seal
The bottom seal is the rubber strip that keeps water, insects, and debris out of the garage. In West Hollywood, the seal also keeps humidity out of the garage, which matters when the interior is air-conditioned and the walls are concrete block that holds moisture. We replace weatherstripping and bottom seals on every door we service in the area, and we always include it in the written scope before work begins. Call (970) 536-1724 for current pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in West Hollywood
We work on every major brand installed in West Hollywood over the past 50 years: Clopay, Amarr, Wayne Dalton, and Craftsman among them. That means we carry or can source torsion springs with the right cycle rating, roller shafts in the correct gauge, and hinge-mounting brackets sized for 1960s-through-1980s doors. When a West Hollywood home still has a 1982 Wayne Dalton assembly with corroded end plates, we don’t tell the homeowner to buy a new door. We replace the part, document what we installed, and show them the wind-load paperwork if the replacement triggers a permit question.
Common Garage Door Parts Problems We See in West Hollywood Homes
- Humidity-driven spring and cable corrosion: The Atlantic’s salt-laden air, pushed inland on the prevailing breeze, accelerates rust on torsion springs, extension springs, cables, and bearing plates. A spring that would last 12 years in a dry climate often breaks at year 6 here.
- Non-code-compliant 1960s-1980s aluminum panels: Lightweight panels from that era were never designed for Broward County’s post-Andrew wind-pressure standards. Under storm loading, these panels flex, deform, and jam the door mid-travel on the track.
- Track alignment drift from shifting CBS walls: Concrete block homes settle and expand with temperature, which slowly knocks door tracks out of alignment. This causes the photo-eye sensors to misalign at the bottom of the opening, and the opener starts quitting mid-cycle. Homeowners often think the spring broke. It was the track.
- Original bottom seals cracked and flattened: UV exposure and humidity break down rubber seals faster than most homeowners expect. A flattened bottom seal lets water pool inside the garage on heavy rain days, which then soaks into stored items and the drywall.
Pricing for Garage Door Parts in West Hollywood, FL
Here are the price ranges we’ve quoted across West Hollywood in the last 24 months. They include the part, labor, and the documented photo record. The price is agreed in writing before anything gets taken apart.
| Part / Service | Price Range |
|---|---|
| Spring Repair (torsion or extension) | $180-$340 |
| Cable Repair | $130-$250 |
| Track Realignment | $120-$240 |
| Roller Replacement (full set) | $110-$220 |
What changes the price within a range is the spring wire diameter, the cycle rating, whether the door is single or double width, and whether we’re replacing one component or several at once. A single broken roller is cheap. A full spring-and-cable replacement on a 1970s door is at the top of the range. You’ll know the exact number before we start. That’s Clause 1 of The Haven Standard.
We Also Serve Cities Near West Hollywood
Beyond West Hollywood, our crews cover West Hollywood and the surrounding South Florida corridor including Jacksonville, Miami, Tampa, and Orlando. If you’re in one of those markets and need garage door parts or a full door replacement, the same written price and photo documentation apply. Dispatch runs from our South Florida office, and the crew shows up in a branded van.
Serving West Hollywood, FL - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Parts in West Hollywood
Yes, any garage door component installation that requires a permit in Broward County needs wind-load documentation with product approval numbers on file. Our technicians record the spring cycle rating and wind-load product approval numbers for every replacement, and we hand you that document with the photo record. If a permit inspection is pending, the paperwork is already there. Call (970) 536-1724 if you need a replacement before an inspection.
West Hollywood sits close enough to the Atlantic that salt-laden air gets pushed inland on the prevailing breeze, and the salt settles directly onto steel components in unsealed garages. Combined with year-round humidity, this rusts cables and bearing plates faster than homes further west in Broward. We recommend stainless steel cables for garages within a few miles of the coast.
Look for a product approval sticker or metal plate on the inside face of the door panel that lists wind-load ratings. If you can’t find one, the door was likely never rated for current code. Most 1960s-to-1980s aluminum doors in West Hollywood fail this test. We can inspect the door, document what exists, and quote a wind-rated replacement if one is needed. Estimates are free, and you’ll get our finding in writing.
You should replace both. Extension springs operate in pairs, and when one fails, the other has experienced the same number of cycles and the same corrosion. If you replace only one, the door operates unbalanced, which puts extra strain on the new spring and shortens its life. We replace springs in matched pairs and document the cycle rating of the new set.
If the door is from the 1970s or 1980s and lacks a wind-load rating, a single damaged panel usually triggers a full replacement requirement because the unrated door cannot be brought into compliance with a patch. Many West Hollywood homeowners discover this when a lender or inspector flags an unpermitted door swap before closing. We can assess the damage and quote a compliant replacement with the necessary product approval paperwork, for a free second opinion on any written estimate you already received.
Call Servo Garage Doors for Parts in West Hollywood
If your garage door needs a spring, cable, roller, or seal in West Hollywood, call (970) 536-1724. Someone answers. You’ll get a written price range before we dispatch, a flat written quote before work begins, and a photo record when the job is done. Marcus Deller and the Servo team have been doing it this way since 2015, under The Haven Standard. If it’s not done right, the 365-Day Done Right Promise covers you. The paper trail, the written price, the photographed part: that’s the whole deal.
Written by Marcus Deller, Owner at Servo Garage Doors, serving West Hollywood under The Haven Standard since 2015.
Garage Door Parts in Nearby Areas